2.
If applicable, remove the optical drive.
Remove the optical drive if you are removing hard drive 0. See "
Removing the Optical Drive
."
3.
Disconnect the power and interface cables from the hard drive.
The interface cables for SATA hard drives are connected to the daughter card. See
Figure A
-3
for the location of the daughter card connectors.
The interface cables for SCSI hard drives are connected to a controller card.
4.
Loosen the captive screw that secures the hard-drive carrier to the chassis. See
Figure 6
-2
.
5.
Slide the hard-drive carrier backward and lift the carrier out of the chassis.
Figure 6-2. Removing the Hard-Drive Carrier
6.
Using a #2 Phillips screwdriver, remove the four screws that secure the hard drive to the carrier and remove the drive from the carrier. See
Figure 6
-3
.
Figure 6-3. Removing the Hard Drives From the Drive Carriers
Содержание PowerEdge 850
Страница 90: ......
Страница 132: ...Back to Contents Page ...
Страница 137: ...17 Close the system See Closing the System in Troubleshooting Your System Back to Contents Page ...
