Dell PERC H700 Скачать руководство пользователя страница 2

Страница: 2 / 178

Notes, Cautions, and Warnings

NOTE:

A NOTE indicates important information that helps you make better use of

your computer.

CAUTION:

A CAUTION indicates potential damage to hardware or loss of data if

instructions are not followed.

WARNING:

A WARNING indicates a potential for property damage, personal

injury, or death.

____________________

Information in this publication is subject to change without notice.
© 2010 Dell Inc. All rights reserved.

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.
is strictly forbidden.

Trademarks used in this text: Dell™, the DELL logo, PowerEdge™, PowerVault™, CacheCade™,
and OpenManage™ are trademarks of Dell Inc. Intel

is a registered trademark of Intel Corporation

in the U.S. and other countries. Microsoft

, Windows

, Windows Server

, MS-DOS

, and Windows

Vista

are either trademarks or registered trademarks of Microsoft Corporation in the United States

and/or other countries. Red Hat Enterprise Linux

, and Enterprise Linux

are registered trademarks

of Red Hat, Inc. in the United States and/or other countries. Novell

and SUSE ™ are registered

trademarks of Novell Inc. in the United States and other countries. VMware

is a registered trademark

of VMWare, Inc. in the United States or other countries.

Other trademarks and trade names may be used in this publication to refer to either the entities claiming
the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and
trade names other than its own.

Model UCP-70, UCPM-70, and UCP-71

March 2011

Rev. A02

PERC7.2_UG.book Page 2 Thursday, March 3, 2011 2:14 PM

Содержание PERC H700



















































































































































































Результаты поиска

Содержание PERC H700

Отзывы:

Похожие инструкции для PERC H700

Бренды по названию

Популярные бренды

Dell PERC H700, Руководство пользователя

Результаты поиска

Содержание PERC H700

Отзывы:

Похожие инструкции для PERC H700

Бренды по названию

Популярные бренды