Dell INSPIRON 530 DCMF, Руководство пользователя

Страница: 47 / 206

Setting Up and Using Your Computer
47
When a member of the RAID 1 array is broken, the computer automatically
rebuilds the mirror array using the spare hard drive as the broken member’s
replacement.
To Mark a Drive as a Spare Hard Drive:
1
Click Start and point to All Programs
→
Intel(R) Matrix Storage
Manager
→
Intel Matrix Storage Console to launch the Intel(R) Matrix
Storage Manager.
2
Right-click the hard drive you want to mark as a spare hard drive.
3
Click Mark as Spare .
To Remove Spare Marking From a Spare Hard Drive:
1
Right-click the spare hard drive icon.
2
Click Reset Hard Drive to Non-RAID
Rebuilding a Degraded RAID 1 Volume
If your computer does not have a spare hard drive, and the computer has
reported a degraded RAID 1 volume, you can manually rebuild the computer’s
redundancy mirror to a new hard drive by performing the following steps:
1
Click Start and point to All Programs
→
Intel(R) Matrix Storage
Manager
→
Intel Matrix Storage Console to launch the Intel(R) Matrix
Storage Manager.
2
Right-click the available hard drive to which you want to rebuild the
RAID 1 volume, and click
Rebuild to this Disk .
NOTE:
You can use your computer while the computer is rebuilding the RAID 1 volume.
Transferring Information to a New Computer
You can use your operating system "wizards" to help you transfer files and
other data from one computer to another—for example, from an
old
computer to a new computer. For instructions, see the following section that
corresponds to the operating system that your computer is running.
book.book Page 47 Monday, December 10, 2007 3:12 PM