Dell INSPIRON 530 DCMF, Руководство пользователя

Страница: 110 / 206

110
Removing and Installing Parts
Memory
You can increase your computer memory by installing memory modules on
the system board. Your computer supports DDR2 memory. For additional
information on the type of memory supported by your computer, see
"Memory" on page 163.
NOTICE:
Do not install ECC or buffered memory modules. Only unbuffered,
non-ECC memory is supported.
Memory Installation Guidelines
• DIMM connectors must be populated in numerical order beginning with
connectors DIMM_1 and DIMM_3, then connectors DIMM_2 and DIMM_4.
If a single DIMM is installed, you must install it in connector DIMM_1.
• For best performance, memory modules should be installed in pairs of
matched memory size, speed, and technology . If the memory modules are not
installed in matched pairs, the computer will operate, but with a slight
reduction in performance. (See the label on the module to determine the
module’s capacity.) For example, if you install a mixed pair of DDR2
667-MHz and 800-MHz memory, the modules function at the slowest
speed installed.
book.book Page 110 Monday, December 10, 2007 3:12 PM