Dell 6100, Инструкция по установке и устранению неисправностей, Страница: 84 / 157

8-6 Dell PowerEdge 6100/200 System Installation and Troubleshooting Guide
When installing SIMMs, follow these guidelines:
•
Install the SIMM with the pin 1 end aligned with the
pin 1 end of the socket (see Figure 8-5).
•
Install a SIMM in socket J1 before socket J2, socket
J2 before socket J3, and so on.
•
All SIMMs in one bank must be the same size and
speed, but SIMMs in bank 1 may differ in size from
those in bank 2.
•
SIMMs must be installed in groups of four, eight, or
16 only.
The following SIMM interleaving is supported:
•
Two-way interleaved using J1 to J4
•
Four-way interleaved, single bank using J1 to J8
•
Four-way interleaved, dual bank using J1 to J16
Table 8-1 illustrates the possible memory configurations
based on these guidelines.
Table 8-1. Sample SIMM Configurations
SIMMs Installed in Sockets
Total
Desired
Memory
Bank 1 Bank 2
J1 to J4 J5 to J8 J9 to J12 J13 to J16
64 MB 16 MB None None None
128 MB 32 MB None None None
128 MB 16 MB 16 MB None None
256 MB 16 MB 16 MB 16 MB 16 MB
256 MB 64 MB None None None
256 MB 32 MB 32 MB None None
384 MB 16 MB 16 MB 32 MB 32 MB
384 MB 32 MB 32 MB 16 MB 16 MB
512 MB 32 MB 32 MB 32 MB 32 MB
512 MB 64 MB 64 MB None None
512 MB 128 MB None None None
640 MB 16 MB 16 MB 64 MB 64 MB
640 MB 64 MB 64 MB 16 MB 16 MB
768 MB 64 MB 64 MB 32 MB 32 MB
768 MB 32 MB 32 MB 64 MB 64 MB
1 GB 64 MB 64 MB 64 MB 64 MB
1 GB 128 MB 128 MB None None
1152 MB 16 MB 16 MB 128 MB 128 MB