Dell 6100, Инструкция по установке и устранению неисправностей

Страница: 40 / 157

5-6 Dell PowerEdge 6100/200 System Installation and Troubleshooting Guide
Options
Table 5-1 lists all of the possible values for each global
parameter of the Options menu category from the main
screen. A brief description of each parameter follows. To
change Options parameters, press the <Spacebar>, the
left- and right-arrow keys, or the plus (+) and minus (–)
keys.
Number of Times to Repeat Test(s)
This parameter specifies the number of times the tests run
when you select Run. To change the default, type in the
desired value. If you type
0
(zero), the tests will run
indefinitely.
Maximum Errors Allowed
This parameter specifies the maximum number of errors
that can occur before testing is stopped. The error count
begins from zero each time you run a subtest or test
group individually or each time you select All to run all
of them. To change the default, type in the desired value.
If you type
0
(zero), you are specifying that there be no
limit on the number of errors that can occur—testing will
not be stopped, regardless of the number of errors.
Pause for User Response
If this parameter value is set to Yes, the diagnostics
pauses when one of the following occurs:
•
Your interaction is needed to verify the Video Test
Group screens or the Keyboard Test Group key func-
tions or other types of interaction such as inserting a
diskette.
•
The maximum error limit is reached.
If the Pause for User Response parameter is set to No, the
diagnostics ignores some subtests that require your inter-
action; certain subtests can run only if this option is set to
Yes because they require user interaction. Use this
parameter in situations where you may want to prevent
subtests that require user interaction from running—such
as when you run the diagnostics overnight.
.
Table 5-1. Option Parameters
Option Limit Possible Values
Number of Times to Repeat Test(s) 0001 through 9999, or 0000, which loops indefinitely until you press
the <Ctrl> and <Break> keys. The default is 1.
Maximum Errors Allowed 0000 through 9999, where 0000 means that there is no error limit.
The default is 1.
Pause for User Response Yes, No
Allows you to decide whether tests will wait for user input.
The default is Yes to wait for user input.
Output Device for Status Messages Display, Printer, File
If you have a printer attached to the computer, you can use it to print
the status messages, if any, that are generated when a test runs. (The
printer must be turned on and in the online mode to print.) If you select
File, the messages are printed to a file named result in diskette drive
A. The default is Display.
Output Device for Error Messages Display, Printer, File
This parameter has the same effect as the Output Device for Status
Messages
parameter, except that it pertains only to error messages.
The default is Display.