6. The first available menu item,
IP Address
displays.
7. To enter the numbers, use
Scroll
(
to
) and
Scroll
(
to
) to move between octets and press
Select
(
).
8. Enter other parameters, such as the
Subnet Mask or GateWay
, and press
Select
(
).
9. After entering all parameters, press
Cancel
(
) to return to Standby mode.
Dynamic Addressing (BOOTP/DHCP)
To assign the TCP/IP address automatically using a DHCP or BOOTP server on your network, perform the following steps:
1. Press
Menu
(
).
2. Press
Scroll
(
to
) to highlight
Network I/O Ports
and press
Select
(
).
3. Press
Scroll
(
to
) to highlight
TCP/IP(IPv4)
and press
Select
(
).
4. Press
Scroll
(
to
) to highlight
Set IP Address
and press
Select
(
).
5. Press
Scroll
(
to
) to highlight
DHCP
and press
Select
(
).
To assign the address from the BOOTP server, press
Select
(
) when
BOOTP
displays.
Restoring the Network Configuration
You can return the network configuration to its default settings.
1. Press
Menu
(
).
2. Press
Scroll
(
to
) to highlight
Network I/O Ports
and press
Select
(
).
3. Press
Scroll
(
to
) to highlight
Clear Settings
and press
Select
(
).
4. Press
Scroll
(
to
) to highlight
Yes
and press
Select
(
).
5. Power the printer off and back on.
Setting a Wireless network (Optional wireless network card)
To use the
Dell 5330dn Mono Laser Printer
in both wired and wireless network environments, you can install an
optional wireless network card. For details of Wireless setup, please refer to "Quick Install Guide" for the wireless network
interface card.
Sharing the Printer on a Network
Содержание 5330dn - Workgroup Laser Printer B/W
Страница 35: ...7 Press Cancel to return to Standby mode ...
