DELAIR UX5 HP, Руководство пользователя

Страница: 28 / 137

The Blocks tab, for an example block, is shown below:
For more information, see:
l
Creating a block, page 28
l
Editing the block area, page 29
l
Editing block properties, page 29
l
Setting the direction the rover flies over the block, page 29
l
Splitting a block, page 30
l
Managing blocks, page 31
Creating a block
Add as many blocks as required. To add a block, click and then draw or import the shape of the block.
Drawing a block
1. Click
. A toolbar appears on top of the map, allowing you to add a polygonal or rectangular area.
Click the appropriate shape on the toolbar and then draw the area:
l
For a polygon, click the mouse at each boundary point .
l
For a rectangle, click the mouse on the map. A standard-sized shape appears. The location of the
mouse click is the center of the shape.
2. To stop drawing and confirm the shape, click
. The block appears in the list to the right.
3. To clear the shape, click
.
28
Delair-Tech | 676, Rue Max Planck – 31670 Toulouse-Labège, France | Tel: +33 (0) 5 82 95 44 06 | www.delair.aero
Capital: 238 110,30 € - APE: 3030Z – Intra-Community VAT number: FR90 53 09 69 781 – 530 969 781 R.C.S. Toulouse
This document is the sole property of Delair-Tech and cannot be used or reproduced without the written authorization of Delair-Tech .