DELAIR UX5 HP Скачать руководство пользователя страница 123

Страница: 123 / 137

OSHA

R21 R22

R41 R43

S24 S26 S36
S37 S45

(1) – Nature of special risks:

R14

Reacts with water

R21

Harmful in contact with skin

R22

Harmful if swallowed

R41

Risk of serious damage to the eye

R42/43

May cause sensitization by inhalation and skin contact

R43

May cause sensitization by skin contact

(2) – Safety advice:

Keep out of reach from children

Keep away from moisture

S22

Do not breathe dust

S24

Avoid contact with skin

S26

In case of contact with eyes, rinse immediately with plenty of water and seek medical Protective
clothing

S36

Wear suitable protective clothing

S37

Wear suitable gloves

First aid measures

In case of battery rupture or explosion, evacuate personnel from contaminated area and provide maximum
ventilation to clear out fumes/gases.

In all cases where first aid is applied, seek medical attention.

Eye contact

Flush with plenty of water (eyelids held open) for at least 15 minutes.

Skin contact

Remove all contaminated clothing and flush affected areas with plenty of water and soap for at least 15
minutes.

Do not apply greases or ointments.

Ingestion

Dilute by giving plenty of water and get immediate medical attention.

Make sure that the victim does not aspirate vomited material by use of positional drainage.

Make sure that mucus does not obstruct the airway.

Do not give anything by mouth to an unconscious person.

123

Delair-Tech

676, Rue Max Planck – 31670 Toulouse-Labège, France

Tel: +33 (0) 5 82 95 44 06

www.delair.aero

Capital: 238 110,30 € - APE: 3030Z – Intra-Community VAT number: FR90 53 09 69 781 – 530 969 781 R.C.S. Toulouse

This document is the sole property of Delair-Tech and cannot be used or reproduced without the written authorization of Delair-Tech

Содержание UX5 HP










































































































































Результаты поиска

Содержание UX5 HP

Отзывы:

Бренды по названию

Популярные бренды

DELAIR UX5 HP, Руководство пользователя

Результаты поиска

Содержание UX5 HP

Отзывы:

Бренды по названию

Популярные бренды