DELAIR UX5 HP Скачать руководство пользователя

Страница: 126 / 137

Exposure controls and personal protection

No engineering controls are required for handing batteries that have not been damaged.

Respiratory
protection:

Not necessary under normal use.

In case of battery rupture, use self contained full-face respiratory equipment.

Hand protection:

Not necessary under normal use.

Use gloves if handling a leaking or ruptured battery.

Eye protection:

Not necessary under normal use.

Wear safety goggles or glasses with side shields if handling a leaking or ruptured
battery.

Skin protection:

Not necessary under normal use.

Use rubber protective working in case of handling of a ruptured battery.

Physical and chemical properties

Temperature range:

Continuous

Occasional

In storage

+30 °C (86 °F) max.

-20 to +60 °C (-4 to +140 °F)

During discharge

-20 to +60 °C (-4 to +140 °F)

During charge

0 to +45 °C (+32 to 113 °F)

Stability and reactivity

Conditions to avoid

Heat above 60 °C (140 °F) or incineration.
Deform, mutilate, crush, pierce, disassemble
Short circuit
Prolonged exposure to humid conditions.

Materials to avoid

N/A

Hazardous decomposition products

Fire, excessive heat, or over voltage conditions may produce hazardous decomposition products.

Toxicological information

1. Irritancy: The electrolytes contained in this battery can irritate eyes with any contact. Prolonged

contact with the skin or mucous membranes may cause irritation.

2. Sensitization: No information is available at this time.

126

Delair-Tech

676, Rue Max Planck – 31670 Toulouse-Labège, France

Tel: +33 (0) 5 82 95 44 06

www.delair.aero

Capital: 238 110,30 € - APE: 3030Z – Intra-Community VAT number: FR90 53 09 69 781 – 530 969 781 R.C.S. Toulouse

This document is the sole property of Delair-Tech and cannot be used or reproduced without the written authorization of Delair-Tech

Содержание UX5 HP










































































































































Результаты поиска

Содержание UX5 HP

Отзывы:

Похожие инструкции для UX5 HP

Бренды по названию

Популярные бренды

DELAIR UX5 HP, Руководство пользователя

Результаты поиска

Содержание UX5 HP

Отзывы:

Похожие инструкции для UX5 HP

Бренды по названию

Популярные бренды