Remote Management Unit: Dell PowerVault 124T DLT VS160 Autoloader User's Guide
file:///T|/htdocs/stor-sys/124T/en/124tvs16/rmu.html[12/5/2012 10:26:00 AM]
From a remote location, you can request that a tape be moved from one position to another. To move a tape:
1. From any page, click the
Library Operations
heading. The
Library Operations
screen displays.
2. From the
Moving Tapes
section of the page, click the drop-down menu under
From:
and select the current location of
the tape that you want to move.
NOTE:
You can also click the slot on the graphic of the autoloader magazine to select and move a cartridge.
3. From the drop-down menu under
To:
, select the location to which you want to move the tape, and then click
submit
.
Inventory
The autoloader automatically runs an inventory whenever you power it on or insert a magazine. If you need to run an
inventory in addition to this, you can use the Remote Management Unit to do it remotely. To run an inventory:
1. From any page, click the
Library Operations
heading. The
Library Operations
screen displays.
2. From the
Library Operations
page, click
Inventory
. The autoloader starts an inventory immediately.
Set to Home
If the autoloader is not able to successfully execute a
Moving Tapes
or an
Inventory
command, try executing a
Set to
Home
command, and then retry the move or inventory command again.
The
Set to Home
command resets the autoloader as a means to help the autoloader recover from an unexpected internal
condition. To
Set to Home
:
1. From any page, click the
Library Operations
heading. The
Library Operations
screen displays.
2. From the
Library Operations
page, click
Set to Home
. This executes a reset command to the autoloader.