GoIP User Manual
http://www.dbltek.com
41
The parameters for this section are described in details in the table below.
Parameter
(SIM Card)
Description
Default Value
1.
GPRS Registration
This enables the GPRS registration mode for all GSM channels.
Enable
2.
SIP Registration when
Talk Time Limit Expires
This parameter determines if SIP Registration is enabled or disabled when
Talk Time Limit expires.
If it is enabled, incoming calls are still enabled
when Talk Time Limit expires.
Disable
The parameters below only apply to the channel selected.
3.
GSM Number
This specifies the phone number of the SIM Card that is inserted to the
channel selected. This field MUST be specified when the Hunt Group
mode is enabled.
Otherwise, GSM Call Forward cannot be setup
properly.
4.
IMEI
This specifies the
International Mobile Equipment Identity number
.
The
device comes with a factory default value.
Once changed, this value
cannot be restored.
Factory
Default
5.
Unlock PIN1
SIM Card unlock PIN code 1
6.
Unlock PIN2
SIM Card unlock PIN code 2
7.
Talk Time Limit (m)
There are two ways to define the Talk Time Limit for a SIM card.
1. Total talk time without any time limit - When the accumulative talk
time since the last reset reaches this limit, the SIM card is disabled.
The SIM card must be reset via the status page or via a special SMS
command (see Appendix A).
Syntax: <limit>
<limit> is an integer.
2. Talk time allowed as per the period defined - When the accumulative
talk time since the period starts reaches the Talk Time Limit defined,
the SIM card is disabled for outgoing calls until the period expires.
If
there is an overlap between two periods defined, the first period takes
priority.
The next period starts from the end of the first period.
If
there is a gap between two periods, the talk time for this gap is
unlimited.
It is important to note that the Talk Time Limit is reset
automatically to the one defined for the next period.
There is no
need to reset a SIM via the webpage in this case.
Syntax: <period1, limit1>|<period2, limit2>|....
<Period> is defined in 24-hr format with starting and ending time
separated by a "-".
Example 1: 00:00-24:00
This specifies a time period of one day starting from 00:00 till the end
of the day.
Example 2: 08:00-12:00,100|11:00-20:00,200
In this example, the first period starts from 08:00 till 12:00 with a talk
time limit of 100 minutes.
The second period starts from 12:00 till
20:00 with a talk time limit of 200 minutes.
From 20:00 till 08:00
(the next day), there is no talk time limit.
Note: By default, SIP Registration is disabled when a SIM card is disabled.
To change this default, select the [Enable] option for SIP Registration when
Talk Time Limit Expires in the SIM Page.
8.
Drop Call (when the
Total Talk Time Limit
Expires)
This parameter specifies if the active call is dropped or not when the Total
Talk Time Limit expires.
9.
Talk Time Limit (m) /
Call
This sets the limit for the maximum talk time per call.
When this limit is
reached, the call is dropped automatically.
Содержание GoIP
Страница 30: ...GoIP User Manual http www dbltek com 29 3 3 5 ...
