DBL Technology GoIP Скачать руководство пользователя страница 18

Страница: 18 / 63

GoIP User Manual

http://www.dbltek.com

4. Auto-provision



Provision Server



Provision Interval

The auto provision is optional.

When this option is enabled, the device

downloads its configuration from the Auto Provision Server at start up or at the

time interval specified by the Provision Interval.

The configuration file name is

<Serial Number>.cfg which is just a text file (not encrypted).

If encrypted

format is required, please contact technical support for further assistance.

Please note that Auto Provision Server is a free utility supporting both Linux and

Window environment.

Please visit our website or contact technical support

for more information.

The specifies the Provision Sever address (IP or Domain name)

This specifies the interval in performing an auto provisioning event.

5. Remote Control



Remote Server



Remote Server

Port



Remote Server ID



Remote Server

Password

This is a unique feature that allows remote access to the device's built-in Web

server even when it is installed behind NAT.

To achieve this function, a Remote

Control Server is required to be installed.

This server is a free Linux based

utility and is available for download via our website.

Please contact technical

support for further assistance if required.

Once installed, please make sure

that the Remote Server Port and Password are set properly.

This specifies the IP address or the domain of the Remote Control Server.

Check with your Remote Server administrator for the communication port.

This specifies the name to be appeared in the Remote Control Server.

It is used as a

reference for the device.

This specifies the login password to the Remote Control Server.

This is not the password

to login to the built-in webpage.

Please ask your Remote Server Administrator if it is not

available.

1920

6. Network Tones

Network tones are the tones associated with the traditional (PSTN) telephone

network, such as dial tone, ring back tone, busy tone, call waiting tones, etc.

These tones will only be used when the device answers an incoming call and the

call is not forwarded to a SIP server automatically.

Predefined Network Tones

are classified by country name.

If the country desired is not found in the list,

the “Custom” selection allows users to define the network tones individually.

Please refer to Appendix B for more information.

7. HTTP Port

This sets the port that is used to access the built-in web server.

The default

port number is 80.

The port range is from 1 to 65535.

8. DDNS



DDNS Address



DDNS Port



Update Interval

This is a proprietary DDNS service offered by DBL.

It allows DBL's products to

identify each other via this DDNS service.

When this service is activated, the

domain name of the device is its <serial number>.com.

This feature is useful

to support peer-to-peer configuration.

The default DDNS Address is “voipddns.net” which a free service offered by DBL.

Please

contact your vendor if you want to install your own DDNS server.

The default communication port number is 39800.

This specifies the interval between registrations to the DDNS.

voipddns.net

39800

120 (mins)

Содержание GoIP
































































Результаты поиска

Содержание GoIP

Отзывы:

Похожие инструкции для GoIP

Бренды по названию

Популярные бренды

DBL Technology GoIP, Руководство пользователя

Результаты поиска

Содержание GoIP

Отзывы:

Похожие инструкции для GoIP

Бренды по названию

Популярные бренды