GoIP User Manual
http://www.dbltek.com
51
.
The procedures to send a SMS are:
a)
Select the Line (GSM channel) that you want to send a SMS.
The line status and the SIM (GSM)
number are displayed.
The last option "All Lines" means that all channels are selected and the
same SMS is sent via all channels provided that they are in the Login Status.
b)
Enter the recipient’s phone number (GSM)
c)
Type the SMS message in the SMS Content box.
The maximum length of a message is 140
characters for 7/8-bit ASCII code and 70 characters for 16-bit Unicode) .
d)
Click [Send] to send out the SMS.
3.4.5
SMS In Box
Click [SMS In Box] to view the SMS messages received as shown below.
Select the desired line to view
the latest 5 messages received for the corresponding GSM channel.
3.4.6GSM Channel Control
This feature is implemented for two functions:
1. Removing the power to a GSM channel before removing or inserting a SIM card.
This is the
recommended procedure in order to prevent damages to the SIM card.
2. Disabling a GSM channel temporary.
Click [GSM Channel Shut Down] to access the webpage below to shut each GSM module individually.
Place a check mark (
) to select the desired channel and then click [Save] to activate the shut down.
Remove the check mark and then click [Save] to turn on the channel again.
The "All Channels"
selection is a short cut to turn on or to shut down all channels.
Содержание GoIP
Страница 30: ...GoIP User Manual http www dbltek com 29 3 3 5 ...
