Viper User
Manual (001-5008-000 Rev6)
Page
35
V
V
I
I
P
P
E
E
R
R
W
W
E
E
B
B
M
M
A
A
N
N
A
A
G
G
E
E
M
M
E
E
N
N
T
T
A built-in web server makes configuration and status monitoring possible from any browser-
equipped computer, either locally or remotely. Status, configuration, and online help are
available without requiring special client software. Setup is password-protected to avoid
tampering or unauthorized changes.
Both the configuration parameters and operating firmware can be updated remotely, even
over the RF network itself, using the standard FTP protocol.
NAVIGATING THE NETWORK MANAGEMENT SYSTEM
The Web Interface is subdivided in two frames: the left frame allows the user to navigate
the main menu, while the right main frame displays the selected page.
Figure 4.1 Viper Welcome Screen
MAIN MENU
VIPER Main menu grants the user access to Unit Status, Setup Wizard, Basic and Advanced
Setup, Security, Statistics, Maintenance, and Network Management.
1.1.27
Network Management System Commands
The remaining buttons on the Navigator frame are used to save your configurations and
reset the unit.
Apply
This command button writes to RAM. When making an entry into a dialog box, click “Apply”
when you are satisfied with the changes to temporarily apply the value(s) entered to the
relevant parameter(s).
Failure to use the “Apply” command button before leaving a
web page will result in the loss of entered selections, addresses, and values.
