Datalogic matrix 450N, Справочное руководство

Страница: 168 / 175

MATRIX 450N™ REFERENCE MANUAL
156
A
ID-NET NETWORK TERMINATION
The network must be properly terminated by a 120 Ohm resistor at the first and last reader of
the network.
INPUTS
There are two optocoupled polarity insensitive inputs available on the M16 19-pin connector
of the reader: Input 1 (External Trigger) and Input 2, a generic input. See par. for more
details.
The electrical features of both inputs are:
INPUT | V
AB
| Min. | V
AB
| Max. I
IN
Max
.
Open 0 V 2 V 0 mA
Closed 4.5 V 30 V 10 mA
The relative pins on the M16 19-pin connector are:
Pin Name Function
A Vdc Power Supply input v
B I1A External Trigger A (polarity insensitive)
C I1B External Trigger B (polarity insensitive)
D I2A Input 2 A (polarity insensitive)
E I2B Input 2 B (polarity insensitive)
L GND Power Supply input voltage -
OUTPUTS
Two opto-coupled general purpose outputs are available on the M16 19-pin connector. See
par. for more details.
The electrical features of the two outputs are the following:
OUTPUT I
Load
V
Out
Open 0 mA 30 Vdc Max
Closed 10 mA 1.8 Vdc Max
P
D
= V
Out

I
oLoad
= 170 mW Max.
The pinout is the following:
Pin Name Function
H O1+ Configurable digital output 1 - positive pin
F O1- Configurable digital output 1 - negative pin
G O2+ Configurable digital output 2 - positive pin
I O2- Configurable digital output 2 - negative pin