DataCard ImageCard IV, Руководство пользователя, Страница: 77 / 204

Using the printer
5-13
User’s Guide for the ImageCard® IV Printer
You can remove the card from the print station or allow the printer to clear the
card.
5 Replace the print ribbon cartridge. See “Replacing the print ribbon cartridge” on
page 4-4 .
6 Close the cover of the printer and press to latch it. If the printer has a lock, lock the
printer.
7 Select the Retry, Cancel, or Okay button on the message box displayed on the
PC.
The card moves to the reject bin.
8 Return to the card creation program to send the card to print again.
♦
Removing cards
Remove completed cards from the output tray when an "Output tray full" message
appears or to distribute printed cards. The output tray holds up to 250 cards with a
nominal thickness of 0.030 inch (0.76 mm).
You can remove cards when the printer power is on or off, or while the printer is
printing.
1 If the printer has a lock, unlock the printer. Lift the output tray cover and set aside
(step 1 in
Figure 5-7 ).
2 Hold the card output tray and pull back on the card pusher. Lock it in the notch on
the bottom of the output tray (step 2 in
Figure 5-7 ).
Figure 5-7: Remove completed cards
3 Lift cards from the output tray (step 3 in Figure 5-7 ).
Cards toward the front of the printer were printed before cards toward the rear of
the printer.
i
ICIV003U
3
2
1