DataCard ImageCard IV, Руководство пользователя, Страница: 59 / 204

Loading supplies
4-13
User’s Guide for the ImageCard® IV Printer
Figure 4-10: Replace the overlay cartridge
3 Lower the overlay cartridge into the printer (step 1 in Figure 4-10 ). Make sure the
supply material passes between the heated roller and the platen roller. Turn the
supply knobs if needed to take up slack so the material does not wrinkle as the
cartridge is pushed in place.
4 Press down to seat the overlay cartridge in the printer.
If the cartridge becomes stuck part of the way into the station, turn the supply and
take-up knobs clockwise slightly so the spindle ribs fit between the spool ribs.
5 Press the cartridge lock to secure the overlay cartridge in the printer (step 2 in
Figure 4-10 ).
6 Move the supply tracker toward the full supply roll until it rests on the supply roll
(step 3 in
Figure 4-10 ).
If the supply tracker does not have a handle, it will move into position
automatically.
If you use an adjustable overlay cartridge, follow the steps provided with the
cartridge to produce a laminate patch placement that meets specifications.
7 Close the cover of the printer and press down to latch it. If the printer has a lock,
lock the printer.
♦
Changing the topcoat in the topcoat station
This section describes the three steps of changing the topcoat material:
•
Remove the topcoat cartridge
•
Load topcoat in the cartridge
iciv035u
2
1
1
3
E
i
E