DataCard ImageCard IV, Руководство пользователя, Страница: 156 / 204

B-4
User’s Guide for the ImageCard® IV Printer
Laminate material
Use Datacard DuraGard® laminate material in the ImageCard IV printer if the printer
includes an optional overlay station. (Laminate is also called overlay.) Some material
types can only be used with the newer metal heated roller. The overlay station has a
light blue dot on it if it contains a metal heated roller. If you use 1.0 mil or 1.1 mil
laminate, you must also use composite (not PVC) cards because of the heat required
to apply 1.0 mil or 1.1 mil material.
If the printer has an optional topcoat station, see “Topcoat material” on page B-6 .
The following describes the laminate materials you can use and the roller types
required:
Name Part number Heater roller Description
DuraGard
0.6 mil
Holographic
Laminate 547562-001 Either Die-cut polyester patches on a
carrier material with a tamper-
evident image.
About 300 uses.
DuraGard
0.6 mil
Smart Card
Holographic
Laminate 547562-052 Either Die-cut polyester patches on a
carrier material with a tamper-
evident image. Patch covers all
of the card except the area of the
smart card chip.
About 300 uses.
Duragard
1.1 mil
Holographic
Laminate 553269-003 Metal only Die-cut polyester patches, 1.1
mil thick, on a carrier material
with a tamper-evident image.
About 250 uses.
Duragard
1.1 mil
Smart Card
Holographic
Laminate 553269-004 Metal only Die-cut polyester patches, 1.1
mil thick, on a carrier material
with a tamper-evident image.
Patch covers all of card except
the area of the smart card chip.
About 250 uses.
DuraGard
1.0 mil Clear
Laminate 553277-101 Metal only Full-card die-cut polyester
patches, 1 mil thick, on a carrier
material.
About 250 uses.
i