DataCard ImageCard IV, Руководство пользователя, Страница: 71 / 204

Using the printer
5-7
User’s Guide for the ImageCard® IV Printer
Figure 5-4: Load an exception card
5 Hold the card input tray and release the card pusher to hold all cards in place.
Replace the card input tray cover.
6 In the card creation application, send the exception card to print.
7 The ImageCard IV printer picks the exception card and uses the data from the
card creation application to process it.
8 When the exception card is complete, it is placed in the output tray along with all
other printed cards. You can resume normal processing.
♦
Print from a PC application
1 In the application, choose the SmartDriver as the current printer.
The default name for the ImageCard IV printer, when it is installed, is
SmartDriver. Your printer might have a different name than SmartDriver.
2 Choose the printer settings that correspond to the cards to print. See “Working
with Properties and other driver dialog boxes” on page 5-4 for more information.
Settings might include the following:
– Enable two-sided printing if you plan to print the front and back of the card.
– Set the margins for the area to print on the card. A setting of Edge-to-Edge is
the same as a margin of 0.
– Set the orientation for the card design—either portrait or landscape.
– Set the magnetic stripe format and coercivity if you plan to encode magnetic
stripe data.
– Enable or disable topcoat or overlay, depending on the options in the printer
and the features you want for this card.
– For a shared printer, choose the Ribbon Type to match the ribbon installed in
the printer. (Do not use the autodetect setting.)
3 Using the application's page setup feature, set the following:
ICIV079U
1
3
E