DataCard ImageCard IV, Руководство пользователя, Страница: 30 / 204

3-6
Setting up the printer
User’s Guide for the ImageCard® IV Printer
Load cards
1 If the printer is printing while you load cards, press the Ready button to pause the
printer (
Figure 5-1 ).
2 Lift the input tray cover and set aside (step 1 in Figure 3-7 ).
3 Hold the card tray and slide the card pusher to the left (step 2 in Figure 3-7 ). Latch
the card pusher in the notch on the bottom of the card tray.
Do not touch the surface of cards before printing them. Handle cards by the edges
or wear gloves to protect cards. Oils on hands can cause discolored printing.
4 Fan cards to separate the edges of cards (see Figure 3-6).
Figure 3-6: Fan cards
5 Align cards correctly. While facing the printer:
– Place the front surface of the card to the left.
– Place the magnetic stripe toward the top and facing to the right.
– Place the smart card chip toward the top and facing left.
Figure 3-7: Load cards in the ImageCard IV printer
6 Place up to 250 cards in the space created by moving the card pusher back (step
3 in
Figure 3-7 ).
If your cards are thicker or thinner than 0.030 inch (0.76 mm), the maximum
number of cards you can load changes.
i
ICIV001U
2
Your name
Y
our
n
a
m
e
3
1
Card input
tray cover
Card input tray
Card pusher
E