DataCard ImageCard IV, Руководство пользователя, Страница: 60 / 204

4-14
Loading supplies
User’s Guide for the ImageCard® IV Printer
•
Replace the topcoat cartridge
If you change the type of supply material you use, see “Changing operational
settings” on page 6-15 for the complete process to follow.
Removing the topcoat cartridge
Remove the topcoat cartridge when a "Topcoat empty" message appears or when
setting up the printer.
Remove the topcoat cartridge
1 Push down on the corner of the printer's top cover to unlatch it. Lift the top cover
to the fully upright position.
When the top cover opens, the interlock switch removes power to the motors
and fans. Power is removed from the heater in the topcoat (and overlay)
station. The topcoat (and overlay) station remains HOT.
2 Move the supply tracker away from the supply roll until it stops (step 1 in
Figure 4-11 ).
If the supply tracker does not have a handle, it will move out of the way
automatically.
3 Pull up on the cartridge lock to release the topcoat cartridge (step 2 in
Figure 4-11 ).
On some cartridges, push and release the cartridge lock to release the
topcoat cartridge.
Figure 4-11: Remove the topcoat cartridge
i
!
i
i
iciv145u
2
3
1