Dascom Tally DP-550, Руководство пользователя

Страница: 31 / 73

Appendix A – Printer Configuration
25
ADVANCED
Setup Method
Menu Item Values Default Value Control
Panel
Setup
Utility
Auto Power Down Off, 1-15 Minute Delay Off
9 9
Print Header No, Yes, Not Loaded Not Loaded
9 9
Print Promotion No, Yes, Not Loaded Not Loaded
9 9
Reprint Mode Disabled, Enabled Disabled
9
MCR Method Always On, Host Request Host Request
9 9
MCR Data 1 Track, 2 Track, 3 Track 1 Track
9 9
Auto Power Down
Possible Values: Off*, 1 Minute Delay … 15 Minute Delay
This item sets whether the printer will automatically power down and if so, after what period of time of
inactivity. If set to a value other that “Off”, the printer will automatically turn itself off after the specified
number of minutes have passed since the printer last received data or last printed, whichever is longer.
Print Header
Possible Values: No, Yes, Not Loaded*
When set to “Yes”, this item causes a previously stored graphic image with an ID value of “?” to be printed at
the beginning of each print job.
Please refer to the
DP-5XX Programmer’s Manual
for more information on storing graphics and logos.
Print Promotion
Possible Values: No, Yes, Not Loaded*
Note
: This item is only available in firmware version 2.8 or later.
When set to “Yes”, this item causes a previously stored graphic image with an ID value of “$” to be printed at
the end of each print job.
This item may be used to print a special logo or graphic image of a special sales promotion or other event, that
also needs to be enabled/disabled by the user in the field.
Note
: In firmware version 2.9 and later, multiple graphic images may be stored with the ID values of “!”,
“@”, “#”, “$”, “%”, “^”, “&”, “*”, “(“, and/or “)”. In this case, the printer will automatically cycle
through each of these images printing one at the end of each print job.
Please refer to the
DP-5XX Programmer’s Manual
for more information on storing graphics and logos.
Reprint Mode
Possible Values: Disabled*, Enabled
Note
: This item is only available when using the Mobile Setup Utility.