SERVICE
17
MAGNET POWER SUPPLY SYSTEM 8500
GAIN adjustment.
From SW version SCS104
The GAIN adjustment can automatically adjust the scaling factor of the selected channel to only
nines. That is eg. 99999 for the 16 bit output current reading. This adjustment is only useful for the
output current and voltage read back (CH0, CH2, CH8, CH11 and CH12) Please do not use this
feature if the output reading is in Volts and Amps and for not applicable channels.
To auto adjust to a specific value, please use the “Esc”ADSET command.
To activate the automatic GAIN adjustment following steps must be performed:
-
Select SW2 as above. “setting number14"
-
Select the desired channel number “lever 1 to 5" on SW1
-
Set lever 8 on SW1 to ON
-
Ensure that the AD input signal is set to 100%
-
Press the Setup Button
-
To restore the Gain value to default factory setting , please set lever 7 to one before pressing
the Setup Button.
DA AUTO ADJUSTMENT (Gain & Offset).
The scaling factors for the DA channels can automatically be adjusted with this setting. This feature
is specially designed for “non calibrated” DACs as for the 855 DAC.
Parameters
DANFYSIK A/S - DK 2630 TAASTRUP - DENMARK.
DOC NO P80303Sk
