No.
Description
Warning
Alarm/Trip
Alarm/Trip Lock
Parameter Reference
244
Heatsink temp
X
X
X
245
Heatsink sensor
X
X
246
Pwr. card supply
X
X
247
Pwr. card temp
X
X
248
Illegal PS config
X
X
250
New spare part
X
251
New type code
X
X
Table 8.2 Warning/Alarm Action List
(X) Dependent on parameter
1)
Can not be Auto reset via
14-20 Reset Mode
A trip is the action when an alarm has appeared. The trip will coast the motor and can be reset by pressing the reset
button or make a reset by a digital input (parameter group 5-1* [1]). The origin event that caused an alarm cannot damage
the or connected parts. A Trip Lock situation can only be reset by a power cycling.
Warnings and Alarms
VLT® Automation VT Drive FC 322 D-Frame Instruction Manual
8-4
MG21E122 - VLT® is a registered Danfoss trademark
8
8
Remote Site Products - 1-888-532-2706 - www.remotesiteproducts.com
http://www.remotesiteproducts.com/p-20776-Danfoss-131X8139-VLT-Automation-VT-Drive-VFD-FC322-230V-20-HP.aspx