Danfoss VLT FC 322, Инструкция по эксплуатации

Страница: 56 / 81

No. Description Warning Alarm/Trip Alarm/Trip Lock Parameter Reference
33 Inrush fault X X
34 Fieldbus communication fault X X
35 Out of frequency range X X
36 Mains failure X X
37 Phase imbalance X X
39 Heatsink sensor X X
40 Overload of digital output terminal 27 (X) 5-00, 5-01
41 Overload of digital output terminal 29 (X) 5-00, 5-02
42 Overload of digital output on X30/6 or overload
of digital output on X30/7
(X) 5-32
46 Power card supply X X 5-33
47 24V supply low X X X
48 1.8V supply low X X
49 Speed limit X
50 AMA calibration failed X
51 AMA check U
nom
and I
nom
X
52 AMA low I
nom
X
53 AMA motor too big X
54 AMA motor too small X
55 AMA parameter out of range X
56 AMA interrupted by user X
57 AMA timeout X
58 AMA internal fault X X
59 Current limit X
60 External interlock X
62 Output frequency at maximum limit X
64 Voltage limit X
65 Control board over-temperature X X X
66 Heatsink temperature low X
67 Option configuration has changed X
68 Safe stop activated X
1)
69 Power card temperature X X
70 Illegal FC configuration X
71 PTC 1 safe stop X X
1)
72 Dangerous failure X
1)
73 Safe Stop auto restart
76 Power unit setup X
79 Illegal PS config X X
80 Drive Initialised to Default Value X
91 Analog input 54 wrong settings X
92 No flow X X 22-2*
93 Dry pump X X 22-2*
94 End of curve X X 22-5*
95 Broken belt X X 22-6*
96 Start delayed X 22-7*
97 Stop delayed X 22-7*
98 Clock fault X 0-7*
104 Mixing Fan fault X X 14-53
220 Overload trip X
243 Brake IGBT X X
Warnings and Alarms VLT® Automation VT Drive FC 322 D-Frame Instruction Manual
MG21E122 - VLT® is a registered Danfoss trademark 8-3
8 8
Remote Site Products - 1-888-532-2706 - www.remotesiteproducts.com
http://www.remotesiteproducts.com/p-20776-Danfoss-131X8139-VLT-Automation-VT-Drive-VFD-FC322-230V-20-HP.aspx