5 How to Operate the Frequency Converter
5.1.1 Three Ways of Operating
The frequency converter can be operated in three ways:
1.
Graphical Local Control Panel (GLCP), see 5.1.2
2.
Numeric Local Control Panel (NLCP), see 5.1.3
3.
RS-485 serial communication or USB, both for PC connection,
see 5.1.4
If the frequency converter is fitted with fieldbus option, please refer to
relevant documentation.
5.1.2 How to Operate Graphical LCP (GLCP)
The following instructions are valid for the GLCP (LCP 102).
The is divided into four functional groups:
1.
Graphical display with Status lines.
2.
Menu keys and indicator lights (LEDs) - selecting mode,
changing parameters and switching between display functions.
3.
Navigation keys and indicator lights (LEDs).
4.
Operation keys and indicator lights (LEDs).
Graphical display:
The LCD-display is back-lit with a total of 6 alpha-numeric lines. All data
is displayed on the LCP which can show up to five operating variables
while in [Status] mode.
Display lines:
a.
Status line: Status messages displaying icons and graphics.
b.
Line 1-2: Operator data lines displaying data and variables
defined or chosen by the user. By pressing the [Status] key,
up to one extra line can be added.
c.
Status line: Status messages displaying text.
Auto
on
Reset
Hand
on
Off
Status
Quick
Menu
Main
Menu
Alarm
Log
Back
Canc
el
In
fo
OK
Status
1(0)
1234rpm
10,4A
43,5Hz
Run OK
43,5Hz
On
Alarm
Warn.
130BA018.13
1
2
3
4
b
a
c
The display is divided into 3 sections:
Top section (a) shows the status when in status mode or up to 2 vari-
ables when not in status mode and in the case of Alarm/Warning.
VLT HVAC Drive High Power Operating In-
structions
5 How to Operate the Frequency Converter
MG.11.F3.02 - VLT
®
is a registered Danfoss trademark
83
5