•
For powering customer-supplied accessory devices such as
sensors, PLC I/O, contactors, temperature probes, indicator
lights, and/or other electronic hardware
•
Diagnostics include a dry DC-ok contact, a green DC-ok LED,
and a red overload LED
External Temperature Monitoring
Designed for monitoring temperatures of external system components,
such as the motor windings and/or bearings. Includes five universal in-
put modules. The modules are integrated into the drive’s safe-stop cir-
cuit and can be monitored via a fieldbus network (requires the pur-
chase of a separate module/bus coupler).
Universal inputs (5)
Signal types:
•
RTD inputs (including PT100), 3-wire or 4-wire
•
Thermocouple
•
Analog current or analog voltage
Additional features:
•
One universal output, configurable for analog voltage or ana-
log current
•
Two output relays (N.O.)
•
Dual-line LC display and LED diagnostics
•
Sensor lead wire break, short-circuit, and incorrect polarity de-
tection
•
Interface setup software
VLT HVAC Drive High Power Operating In-
structions
3 Mechanical Installation
MG.11.F3.02 - VLT
®
is a registered Danfoss trademark
49
3