Danfoss MCA 194, Руководство по эксплуатации

Страница: 42 / 48

VLT 5000 series FC 302 series
Parameter 707 PID Velocity Feed-
forward
32-65 Velocity Feed-
Forward
Options 0 – 65000 0 – 100000
Table 5.262 Conversion of Parameter 707
VLT 5000 series FC 302 series
Parameter 708 PID Acceleration
Feed-forward
32-66 Acceleration Feed-
Forward
Options 0 – 65000 0 – 100000
Table 5.263 Conversion of Parameter 708
VLT 5000 series FC 302 series
Parameter 709 PID Velocity filter 33-26 Velocity Filter
Options -500000 – 500000 -1073741824 – 107374203
Table 5.264 Conversion of Parameter 709
VLT 5000 series FC 302 series
Parameter 710 - 779 19-10 -19-79
Options User defined User defined
Table 5.265 Conversion of Parameters 710 to 779
VLT 5000 series FC 302 series
Parameter 780 Dead time compensation Not supported
Options [0] Off
[1] On
Table 5.266 Conversion of Parameter 780
VLT 5000 series FC 302 series
Parameter 781 Program ID Not supported
Options 0 – 65000
Table 5.267 Conversion of Parameter 781
VLT 5000 series FC 302 series
Parameter 795 - 799 User defined
(read only)
19-95 -19-99 User
defined (read only)
Options User defined User defined
Table 5.268 Conversion of Parameters 795 to 799
5.9 VLT ®
5000 Parameter Group 8
VLT 5000 series FC 302 series
Parameter 801 Baud rate selection Not converted
Table 5.269 Conversion of Parameter 801
VLT 5000 series FC 302 series
Parameter 802 Minimum station delay Not converted
Table 5.270 Conversion of Parameter 802
VLT 5000 series FC 302 series
Parameter 803 Time out after bus
error
8-03 Control Timeout
Time
Range 1 – 99 0.1 – 18000.0
Table 5.271 Conversion of Parameter 803
VLT 5000 series FC 302 series
Parameter 804 Response after bus
time out
8-04 Control Timeout
Function
8-02 Control Word Source
Range [0] Off [0] Off
[1] Freeze output
frequency [1] Freeze output
frequency
[2] Stop [2] Stop
[3] Jogging [3] Jogging
[4] Max speed [4] Max speed
[5] Stop and trip [5] Stop and trip
[6] No com. option
control Par. 802 to RS485
[7] Select set up 4 [10] Select set up 4
Table 5.272 Conversion of Parameter 804
VLT 5000 series FC 302 series
Parameter 805 Function of control word
bit 10
8-14 Configurable
Control Word CTW
Range [0] No function [0] None
[1] Bit 10 = 1 => CTW active [1] Profile default
[2] Bit 10 = 0 => CTW active [2] CTW Valid, active
low
[3] Bit 10 = 1 => Time out [1] Profile default
Table 5.273 Conversion of Parameter 805
Parameter Mapping Lists Operating Instructions
40 Danfoss A/S © Rev. 2014-03-06 All rights reserved. MG37E102
5 5