Danfoss MCA 194, Руководство по эксплуатации

Страница: 25 / 48

VLT 5000 series FC 302 series
Parameter 302 Terminal 18, input 5-10 Terminal 18 Digital
Input
Options [0] No function [0] No operation
[1] Start [8] Start
[2] Latched start [9] Latched start
[3] Only start clockwise,
on [12] Enable start forward
Table 5.89 Conversion of Parameter 302
VLT 5000 series FC 302 series
Parameter 303 Terminal 19, input 5-11 Terminal 19 Digital
Input
Options [0] No function [0] No operation
[1] Reversing [10] Reversing
[2] Start reversing [11] Start reversing
[3] Only start
anticlockwise, on [13] Enable start reverse
Table 5.90 Conversion of Parameter 303
VLT 5000 series FC 302 series
Parameter 304 Terminal 27, input 5-12 Terminal 27 Digital
Input
Options [0] Coasting stop,
inverse [2] Coast inverse
[1] Reset and Coasting
stop, inv. [3] Coast and reset inv
[2] Quick-stop, inverse [4] Quick-stop, inverse
[3] DC-braking, inverse [5] DC-brake inverse
[4] Stop inverse [6] Stop inverse
Table 5.91 Conversion of Parameter 304
VLT 5000 series FC 302 series
Parameter 305 Terminal 29, input 5-13 Terminal 29 Digital
Input
Options [0] No function [0] No operation
[1] Reset [1] Reset
[2] Stop inverse [6] Stop inverse
[3] Only start clockwise,
on [12] Enable start forward
[4] Only start
anticlockwise, on [13] Enable start reverse
[5] Jog [14] Jog
[6] Preset reference, on [15] Preset reference, on
[7] Preset reference, lsb [16] Preset reference bit 0
[8] Preset reference, msb [17] Preset reference bit 1
[9] Freeze reference [19] Freeze reference
[10] Freeze output [20] Freeze output
[11] Speed up [21] Speed up
[12] Speed down [22] Speed down
[13] Choice of Setup, lsb [23] Setup select bit 0
[14] Choice of Setup, msb [24] Setup select bit 1
[15] Catch up
[28] Catch up
[16] Slow down [29] Slow down
[17] Ramp 2 [34] Ramp bit 0
[18] Mains failure inverted Not supported
[28] Pulse reference
[32] Pulse input
[29] Data change lock Not supported
Table 5.92 Conversion of Parameter 305
VLT 5000 series FC 302 series
Parameter 306 Terminal 32, input 5-14 Terminal 32 Digital
Input
Options [0] No function [0] No operation
[1] Reset [1] Reset
[2] Stop inverse [6] Stop inverse
[3] Only start clockwise,
on [12] Enable start forward
[4] Jog [14] Jog
[5] Preset reference, on [15] Preset reference, on
[6] Preset reference, lsb [16] Preset reference bit 0
[7] Freeze reference [19] Freeze reference
[8] Freeze output [20] Freeze output
[9] Speed up [21] Speed up
[10] Choice of Setup, lsb [23] Setup select bit 0
[11] Choice of Setup,
msb / Speed up
Not supported
[12] Catch up [28] Catch up
[13] Ramp 2 [34] Ramp bit 0
[14] Mains failure
inverted Not supported
[24] Encoder input 2A [0] No operation
[29] Data change lock Not supported
Table 5.93 Conversion of Parameter 306
Parameter Mapping Lists Operating Instructions
MG37E102 Danfoss A/S © Rev. 2014-03-06 All rights reserved. 23
5 5