Danfoss MCA 194, Руководство по эксплуатации

Страница: 27 / 48

VLT 5000 series FC 302 series
Parameter 311 Terminal 54,
Analogue Input
Voltage 3-16 Reference 2
Source
7-00 Speed PID
Feedback Source
4-20 Torque Limit
Factor Source
1-93 Thermistor
Source
4-21 Speed Limit
Factor Source
Options [0] No Operation Par. 3-16 Reference
resource 2 set to [0]
No function
[1] Reference Par. 3-16 Reference
resource 1 set to [2]
Analog input 53
[2] Torque limit Par. 4-20 Torque
Limit Factor Source
set to [6] Analog in
54
[3] Thermistor Par. 1-93 Thermistor
Ressource set to [2]
Analog input 54
[4] Relative
reference Not supported
[5] Max. torque
frequency Par. 4-21 Speed
Limit Factor Source
set to [6] Analog in
54
Table 5.98 Conversion of Parameter 311
VLT 5000 series FC 302 series
Parameter 312 Terminal 54, min.
scaling
6-20 Terminal 54 Low
Voltage
Range 0 – 10.0 Volt -10.00 – Par. 6-21
Table 5.99 Conversion of Parameter 312
VLT 5000 series FC 302 series
Parameter 313 Terminal 54, max.
scaling
6-21 Terminal 54 High
Voltage
Range 0 – 10.0 Volt Par. 6-20 - 10.00 Volt
Table 5.100 Conversion of Parameter 313
VLT 5000 series FC 302 series
Parameter 314 Terminal 60,
Analogue Input
current
3-17 Reference 3 Source
7-00 Speed PID Feedback Source
1-93 Thermistor Source
4-20 Torque Limit Factor Source
Options [0] No
Operation Par. 3-17 Reference resource 3 set
to [0] No function
[1] Reference Par. 3-17 Reference resource 3 set
to [2] Analog input 54 Par. 7-00
Speed PID
Feedback Source set to [7] Analog
input 54
[2] Feedback
signal Par. 7-00 Speed PID Feedback
Source set to [7] Analog input 54
[3] Torque limit Par. 3-17 Reference resource 3 set
to [2] Analog input 54 Par. 4-20
Torque Limit
Factor Source set to [6] Analog in
54
[4] Relative
reference Not supported
Comments The HW switch S202 for analogue input 54 must be
set to current (ON).
Table 5.101 Conversion of Parameter 314
VLT 5000 series FC 302 series
Parameter 315 Terminal 60, min.
scaling
6-22 Terminal 54 Low
Current
Range 0.0 – 20.0 mA 0.00 – Par. 6-23
Table 5.102 Conversion of Parameter 315
VLT 5000 series FC 302 series
Parameter 316 Terminal 60, max.
scaling
6-23 Teminal 54 High
Current
Range 0.0 – 20.0 mA Par. 6-22 - 20.00 mA
Table 5.103 Conversion of Parameter 316
VLT 5000 series FC 302 series
Parameter 317 Time Out 6-00 Live Zero Timeout Time
Range 0 – 99 sec 0 – 99 sec
Table 5.104 Conversion of Parameter 317
Parameter Mapping Lists Operating Instructions
MG37E102 Danfoss A/S © Rev. 2014-03-06 All rights reserved. 25
5 5