Service guide
|
Disassembling and Assembling, iSave 50-70
© Danfoss | DCS (im) | 2016.10
20 | 180R9387 | 521B1430 | DKCFN.PI.013.1H.02
9. Mount the green spider inside the internal
coupling.
1. Mount a lifting eye in the rotor shaft end
and mount the 8 pins inside the rotor.
3. Remove the lifting eyes and mount the
2 pins in the stator housing.
4. Lubricate the vanes and the rotor slides
with clean filtered water.
2. Carefully lower the rotor straight into the
stator housing, internal coupling and
green spider.
8. Continue assembling the
booster/vane pump
