Dalsa Linea ML ML-FM-08K30H Скачать руководство пользователя страница 51

Страница: 51 / 83

Camera Performance and Features

•

User Setting

The user setting is the saved set of camera configurations that you can customize, resave, and

restore. By default, the user settings are shipped with the same settings as the factory set.

The command user set save saves the current settings to non-volatile memory as a user set. The

camera automatically restores the user set configured as the default set when it powers up.

To restore a saved user set, set the user set selector to the set you want to restore and then select

the user set load parameter.

Factory Settings

The factory setting is the camera settings that were shipped with the camera and which loaded

during the camera’s first power-up. To load or restore the original factory settings, at any time,

select the factory setting parameter and then select the user set load parameter.

Note: By default, the user settings are set to the factory settings.

Default Setting

The default setting is the set loaded when the camera is powered up. Either the factory or one of

the user settings can be used as the default setting by selecting the set to use in the user set

default selector. The chosen set automatically becomes the default setting and is the set loaded

when the camera is reset or powered up.

Содержание Linea ML ML-FM-08K30H




















































































Результаты поиска

Содержание Linea ML ML-FM-08K30H

Отзывы:

Бренды по названию

Популярные бренды

Dalsa Linea ML ML-FM-08K30H, Руководство пользователя

Результаты поиска

Содержание Linea ML ML-FM-08K30H

Отзывы:

Бренды по названию

Популярные бренды