Dalsa Linea ML ML-FM-08K30H Скачать руководство пользователя

Страница: 43 / 83

Camera Performance and Features

•

If using 1 line only, there is the option of having high or low full well, using the

sensorFullWellMode. There is a 4x difference in responsivity between these two modes and also a

4x difference in the full well.

HDR Demo Mode

In planar mode, the camera can be configured to output sensor row 0 and 1 separately. Under the

same conditions, the row 1 is 4x more responsive than the row 0. The contrast ratio does not

always have to be 4:1, it can be varied depending on the contrast of the object. The user can

change the ratio by changing the exposure time and/or gain. Two different responsivities give two

different intensity images in a single scan. In conjunction with the user’s algorithms, a High

Dynamic Range (HDR) image can be created based on the two images. This merging process is

called fusing. The goal of fusing is to replace all low contrast parts with the bright image

accordingly and replace all saturated or near saturated parts with the dark image accordingly.

Simple replacement, however, does not generate a seamless image, which we desire. In order to

get an image which dark parts are enhanced, but no saturations occur, and which is fused

seamlessly, an algorithm needs to be applied.

Ideal curve

Represents

dark image

Represents

bright image

Image Intensity

Max swing

Represents

fused image

The HDR Demo mode demonstrates HDR imaging with a simple fusing algorithm, y = ax + b (1-x),

where 0<x<1, a and b represent dark and bright images, respectively.

The gray curve in above graph represents this algorithm’s result. The result is moderate, yet not

perfect. The user can develop their own algorithm to better suit their applications’ requirements.

The following is a banknote example, which fused with x=.5 in above algorithm.

Содержание Linea ML ML-FM-08K30H




















































































Результаты поиска

Содержание Linea ML ML-FM-08K30H

Отзывы:

Похожие инструкции для Linea ML ML-FM-08K30H

Бренды по названию

Популярные бренды

Dalsa Linea ML ML-FM-08K30H, Руководство пользователя

Результаты поиска

Содержание Linea ML ML-FM-08K30H

Отзывы:

Похожие инструкции для Linea ML ML-FM-08K30H

Бренды по названию

Популярные бренды