DLS 4 / DLS 8 / 8 PLUS / DLS 16 / 16 PLUS
89
Dallmeier electronic
12 Contact IN
Ø
Open the
Contact In
dialog via
Setup
>
Interfaces
>
Contact IN
to configure the contact
inputs.
Fig. 12-1:
Contact In
dialog
12.1
Global and camera-related contacts
First of all only the freely configurable global contacts will be displayed (Global 1 – 6).
The camera-related contact inputs (camera 1 to max. 16) are displayed if you check the
Show camera contacts
checkbox.
Fig. 12-2:
Show camera contacts
The camera contacts can be preset using
Start camera
. Therefore the recording of the
relevant camera is started if the required recording settings have also been made.
Make the required recording settings under
Setup
>
Recording
>
Cameras/Tracks
(see
also the chapter entitled
Recording Settings
).
If you do not wish to record a camera using the
Contact
recording mode, the function can
be changed in the same way as the global contacts (see below).
12.2
Make and break contact functions
First of all only the configuration of the so-called
Make contact function
(
function n.o.
)
of the contact inputs will be displayed. The functions that are executed when the contact
switches (normally when it closes) are defined here.
In addition, however, functions can also be defined that are executed when the contact is
released (normally when it is opened).
