DLS 4 / DLS 8 / 8 PLUS / DLS 16 / 16 PLUS
56
Dallmeier electronic
Timer
The recording is started by the contact switching. Recording is stopped After the
Contact
Recording Duration
expired.
Toggle
The recording is triggered by the contact switching. It is stopped again by the same contact
switching again.
Marker
A marker (index) will be saved to the track when the contact is triggered. While playing back
theses markings can be searched (
index search
and
extended search
).
8.4.2
Standard mode
In
Standard
track mode the images from a camera can be recorded in the LP track and in
the S track. Thereby
different recording modes
may be used. The
video quality settings
and the connection data are always valid
.
The following recording modes can be used in the
Standard
track mode:
l
Permanent
l
Motion
l
Contact
8.4.2.1
Permanent
In the
Permanent
recording mode every image sent by the camera will be recorded.
Ø
Set the
Permanent
recording mode.
Ø
Observe the explanations given below.
Fig. 8-20:
Permanent
recording mode
Ø
Configure
Private Zones
if required (see chapter
Basic configuration
).
Ø
Activate / configure the
Timer
if required (see chapter
Basic configuration
).
Ø
Activate the
Use Database
option if required.
Ø
Set an option (
Event
,
Save
,
Mark
) if required.
Ø
Confirm with
OK
.
