dallmeier DLS 4 Скачать руководство пользователя страница 82

Страница: 82 / 139

DLS 4 / DLS 8 / 8 PLUS / DLS 16 / 16 PLUS

Dallmeier electronic

Housekeeping-

System motoring

This message will be send if the system monitoring Sys-

tem monitoring (housekeeping) detects an event of the

category „info“.
Events of the category „info“ are:
- The internal temperature is in the upper/lower/normal

range.

- The external temperature is in the upper/lower/normal

range.

- The CPU temperature is in the upper/lower/normal

range.

- The average system temperature is in the upper/lower/

normal range.

- The internal/external/CPU or average system temperature

has reached the upper limit. The recorder will be shut

down.

- The revolution of the front fan is too high/too low/nor

mal.

- The revolution of the rear fan is too high/too low/

normal.

- The revolution of the HDD fan is too high/too low/

normal.

Camera failure

This message will be send if fails or is working again.

Camera contact

This message will be send if the recorder starts recording

of a camera because of a contact IN function (Start recor

ding camera (recording mode Contact).

No Recording

This message will be send if no recording is triggered in a

particular track in a defined period. Relevant are cameras/

tracks with the

recording mode motion

contact

. The

appropriate configuration is done in

Setup

System

Options

Recording Timeouts

SEDOR

-Alarm Sabotage

This message will be send if SEDOR

detects a sabotage

event on a camera (defocusing, turning, covering).

SEDOR

Error

This message will be send if SEDOR

detects an internal

error.

Sensor contact

This message will be send if the sensor (sensor card SK6)

detects a movement and thus triggers a recording.
The current recorder version does not support this mes-

sage (no SK6).

Overflow Exeeded

This message will be send if more then 80% of the video

memory is occupied.

Overflow Not Exceeded

This message will be send if the occupation of the video

memory falls below 80% again (e. g. when tracks have

been deleted).

Standard Track Saved

This message will be send if the recorder saves a Secure

Track from being overwritten. It is irrelevant which event

(Alarm or Contact IN) triggers the saving function.

Содержание DLS 4












































































































































Результаты поиска

Содержание DLS 4

Отзывы:

Бренды по названию

Популярные бренды

dallmeier DLS 4, Руководство по установке и настройке

Результаты поиска

Содержание DLS 4

Отзывы:

Бренды по названию

Популярные бренды