DLS 4 / DLS 8 / 8 PLUS / DLS 16 / 16 PLUS
67
Dallmeier electronic
Note that . . .
. . . the function is not suitable for dome/PTZ cameras.
. . . the camera has to be mounted vibration-free.
. . . displaying and sending of a message is not intended.
. . . the
Use Database
option automatically will be activated for the relevant camera.
. . . the
Search Criteria
/
Movement coordinates
option automatically will be activated.
. . . alternating ambient conditions (brightness, precipitation) can cause false messages.
Ø
Left
-click the relevant
SmartFinder
button.
Fig. 8-34:
SmartFinder
activation
The
SmartFinder
function will be activated with default settings for the corresponding
camera. The configuration of the SmartFinder function is done in the
Settings for Smart-
Finder
dialog.
Ø
Right
-click the relevant SmartFinder button.
The
Settings for SmartFinder
dialog will be displayed.
Fig. 8-35: SmartFinder configuration
Ø
Observe the explanations given below.
Ø
Set the
Sensitivity
.
Ø
Set the
Decay time
.
Ø
Finally confirm with
OK
.
Sensitivity
The
Sensitivity
refers to the acceptable deviance between the compared images.
If the
Sensitivity
is set very high, a minor deviance is enough to detect a motion event.
In this case small motions can be detected. But minor deviances often are caused by al
-
ternating ambient conditions (brightness, precipitation). Many false messages have to be
anticipated.
If the
Sensitivity
is set very low, the images have to differ very much. Only distinct motions
will be rated as an event. But only few false messages can be anticipated.
