Dalla Corte ZERO BARISTA, Руководство по эксплуатации

Страница: 22 / 86

2-6
E S P R E SS O “Z E RO BA R I STA” CO F F E E M AC H I N E S- O P E R AT I N G I N ST R U CT I O N S
GENERAL
SAFETY
GENERAL
DESCRIP
TION
USE
MAINTENANCE
TRANSP
OR
T AND
INS
TALLA
TION
DANGER
Do not install nor use the machine if it is wet or very humid. Wait until you are sure the appliance is completely dry.
Before installing or using it, the machine must be thoroughly checked by the maintenance personnel to make sure that
the electric components are not damaged.
• For correct operation, the machine must be used in
premises with temperature b5°C and 30°C. • Do not obstruct the suction grids and/or heat dissipation
grids, in particular the cup warming pad.
• Always use genuine parts and accessories certified by the
Manufacturer. • Before performing any cleaning or maintenance operations,
switch Off the machine and disconnect power cord.
• In case of defective working, damaged parts of the machine
or if it stops working, switch it OFF and disconnect it from
mains. Do not attempt to repair the machine. The machine
must be repaired by a Manufacturer’s qualified technician. • In case of prolonged storage at temperatures below
2°C, empty the hydraulic circuit of the appliance. Before
switching On the machine, let it stay at least one hour in a
place at ambient temperature.
• The rear boiler and the pump are equipped with thermal
switches which stop the heating process in case of failure
or overheating. • Access to the service zones is allowed only to experienced
personnel, in particular with regard to safety and hygiene.
ATTENTION
As a precautionary measure, periodically check correct fastening of all safety devices. It is strictly forbidden to carry
out modifications to the machine in order to prevent additional risks.