Dalla Corte ZERO BARISTA, Руководство по эксплуатации

Страница: 16 / 86

1-4
E S P R E SS O “Z E RO BA R I STA” CO F F E E M AC H I N E S- O E P R AT I N G I N ST R U CT I O N S
GENERAL
SAFET
Y
GENERAL
DESCRIP
TION
USE
MAINTENANCE
TRANSP
OR
T AND
INS
TALLA
TION
WARNINGS
• Keep all components of the packaging (plastic bags,
polystyrene foam, nails, cardboards, etc…) out of reach of
children. This material is a potential source of risk. • The manufacturer will not be held responsible in case
of damage to property and persons, caused by wrong
installation or use.
• Before connecting the machine, make sure that the plate
data correspond with data of the electric distribution
network. • For part replacement, please contact a concessionaire or
an authorized dealer. Only genuine parts are to be used.
• Do not expose the machine to bad weather. Do not install the
machine in high humidity environments. • Do not stack more than 3 packages of the same type. Do not
stack packages of different type on the package.
• The packaged machine is to be stored in a place sheltered
from bad weather, dry and without moisture. The storage
temperature must not be below +5°C. • The packages can be stacked for a maximum of three
pieces of the same type. Do not stack heavy packages of
other types on top of the packaging.
• In case of doubts, have the electric installation checked
by qualified personnel only. The installation must meet
the requirements of the current safety regulations
(effective grounding, section of conductors adequate to the
consumption power and life-saving circuit breaker). • It is advisable not to use adapters, multiple plug sockets
and/or electrical extension cords. If their use becomes
indispensable, it will be necessary to use products with
certified quality (type IMQ, VDE, +s, etc…) and check that
the power value stamped on them is higher than the power
consumption [A = amperes] of the appliance connected to
the mains.