Dali Wireless airHost PS Скачать руководство пользователя страница 154

Страница: 154 / 243

154

Dali Matrix PS System Installation and Commissioning Guide

Dali Wireless Proprietary and Confidential | DW-MAN-036 Rev 06

RF Module Status

Description

Standby



RF module has powered on successfully.



RF module is not sending or receiving RF signals.



RF module is ready for configuration or servicing (such as upgrades or
restarts).



Clicking Standby activates the module, changing the status to Active.

Active



RF module is sending or receiving RF signals.



Minor or major alarms may be present.



Clicking Active deactivates the module, changing the status to
Standby.

Failed



A module critical alarm has occurred and the RF path has been
deactivated.



Always accompanied by a critical alarm which indicates the cause of
the failure



RF module may recover and return to Active automatically. If the RF
module cannot recover, then the module can be placed in Standby
manually.



Clicking Failed deactivates the module, changing the status to
Standby.

Activating



RF module is changing from Standby to Active (displays briefly

Missing



RF module has been physically removed.



Always accompanied by an associated critical alarm.



May change to Standby if the module is replaced.



If the module is replaced elsewhere or the slot is reused, the critical
alarm is cleared.



RF module cannot be configured while Missing.

No Link



All optical links on a remote are also showing No Link. For more
information, see

Optical Port Status



RF modules are deactivated to prevent damaging optical signals from
being passed over the optical link.



When all optical links have been restored, the modules return to
Active or Failed status.

Содержание airHost PS




















































































































































































































































Результаты поиска

Содержание airHost PS

Отзывы:

Похожие инструкции для airHost PS

Бренды по названию

Популярные бренды

Dali Wireless airHost PS, Инструкция по установке и наладке

Результаты поиска

Содержание airHost PS

Отзывы:

Похожие инструкции для airHost PS

Бренды по названию

Популярные бренды