[9]
Rev 4/15/14
Dairy Tech, Inc.
Service Manual:
DT10G, DT30G &DT60G
Mounting the DT10G onto the Base
The DT30G and DT60G each come with a fully assembled leg
stand to support the machines. The DT10G is shipped to you in
specially designed box that is half metal and half cardboard.
You can discard the top cardboard half after removing straps
and carefully lifting off of the machine. With an assistant,
carefully lift the pasteurizer out of the metal powder coated box
and set the DT10G to the side. Turn the white box over and
move it to the location where you wish to install the machine.
Lift the pasteurizer and place it on the box so that the sides and
front line up with the mounting holes. You will find two
mounting brackets and hardware which you can use to secure
the DT10G cabinet to the support box. Refer to the illustration
below.
Lid Storage
The lid is packaged with the unit and can be hung on either side
of the pasteurizer by the 2 holes at the top of the tab. This
provides a convenient place to store the lid while the unit is
being cleaned or filled. See below for proper lid storage.
Содержание Platinum Series
