Daimer KLEENJET PRO PLUS 300CS страница 4 Скачать руководство пользователя | Manualshive

Страница: 4 / 40

background image

4

DIRECTIONS FOR USE

Beg Bug Mitigation Procedure: Pro Plus 200S & Pro Plus 300CS

Prime Areas to Target:

Mattresses, Mattress Seams, Under Labels, Cushions, Chairs/Sofas, Carpet Edges.

*Always ensure that creases and crevices, including buttons, are targeted.

Procedure:

It is a violation of Federal law to use this product in a manner inconsistent with its labeling.

Turn on Machine & Attach Tools:

Plug power cord into grounded 120V outlet.
Press main power switch (2A) and Accessory Power Switch (02) LED will light up.
Press boiler power switch (3) LED will light up.
Attach steam hose (20) by pushing latch (26) into steam outlet (7).
Attach extension rod (30) to steam wand and lock in place by moving locking latch (31) to the "blok" position.
Attach desired tool to extension rod(s) locking in place with locking latch when applicable:
For steam lance attach detail brush by pushing brush onto the tip of the steam lance.
For rectangular brush and large triangular brush attach microfiber towel using towel clips.

Operation:

When the green steam ready indicator lights up, the machine is ready for use.
Press MED switch (23) for medium steam output.
Place attachment onto surface and depress the steam command switch (21) to emit steam.
With attachment in contact with the surface and steam being emitted, move attachment at a rate of ~30cm every
10-15 seconds. Adjust rate of movement so that surface reaches a temp of 160ºF – 175ºF.

Sources:

Meek F. 2003. Bed bugs bite back. Pest Control Technology, 31: 43, 44, 46, 47, 50, 52.
Doggett S. 2010. A Code of Practice for the Control of Bed Bug Infestations in Australia, 3rd Ed. Institute of
Clinical Pathology and Medical Research, 34-36.

General cleaning:

See "Surface Cleaning Tips"

ALL DEVICES NOT USED ANYMORE CONTAIN PRECIOUS RECICLABLE
MATERIALS THAT SHOULD BE DELIVERED TO THE CENTERS SUITABLE FOR
THE   DISPOSING OF THE   WASTE. ELECTRIC AND ELECTRONIC EQUIPMENT,
BATTERIES, OIL AND SIMILAR SUBSTANCES    MUST   BE RECYCLED IN THE
PROPER   RECYCLING CENTERS AND MUST NOT BE LEFT IN THE
ENVIRONMENT.

SUBSTANCES SUCH AS OIL FOR MOTORS, DIESEL OIL, PETROL MUST NOT BE
LEFT IN THE ENVIRONMENT AND MUST BE RECYCLED IN THE PROPER
RECYCLING CENTERS ACCORDING TO THE ENVIRONMENTAL REGULATIONS.

«
...
2
3
4
5
6
...
»

Содержание KLEENJET PRO PLUS 300CS









































Отзывы:

Нет отзывов

Похожие инструкции для KLEENJET PRO PLUS 300CS

Бренд: TurboTronic Страницы: 88

Бренд: Midea Страницы: 18

Бренд: eta Страницы: 44

vaporetto pro70

Бренд: POLTI Страницы: 16

Бренд: MONSTER FLOOR Страницы: 16

Бренд: Clatronic Страницы: 54

Бренд: Vremi Страницы: 9

Бренд: Haan Страницы: 19

Бренд: Sweepovac Страницы: 7

Бренд: domoova Страницы: 280

Бренд: Tennant Страницы: 56

Astrata V-107APP

Бренд: Vax Страницы: 12

Бренд: Clemas & Co Страницы: 7

Бренд: Eureka Страницы: 13

Бренд: Numatic Страницы: 16

Бренд: Dust Care Страницы: 6

CLEANVIEW 2903 Series

Бренд: Bissell Страницы: 13

WetVac AS-CA022

Бренд: aspiron Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды