11
22. Steam Control Switch – MIN –
Minimum steam pressure. Press for minimum
steam pressure. Combine with MED Steam Control Switch for maximum steam
pressure.
23. Steam Control Switch – MED –
Medium steam pressure. Press for medium steam
pressure. Combine with MIN Steam Control Switch for maximum steam pressure.
25. Accessory Blocking Hook
26. Steam Plug & Electric Contacts-
End of the hose which is placed into the Steam
Outlet & Electric Contacts (7).
27. Plug Clamping Hook-
Engages the Steam Plug and Electric Contacts (12) with the
Steam Outlet & Electric Contacts (7). Pushing this button towards the system
releases the connection.
30. Extension Tubes-
Rods that can be used individually or connected to one another
and inserted into the opening of the gun. Accessories 17-27 can be attached to the
end of the extension tube(s) and locked into place with the Clamping Unit (31).
31. Clamping Unit- Block/Open-
Used to secure extension tubes and attachments.
32. Large Rectangular Brush-
Attach to end of extension rod to clean large open areas.
It excels on surfaces of carpet (spot cleaning), tile, marble, stainless steel, or most
kinds of hard surfaces that do not readily absorb water. It can be used alone or with a
polishing cloth.
35. Cloth Holder
35. Large Triangular Brush-
Attach to end of gun or extension rod to clean counter
tops, inside refrigerators, etc. Should be used with a towel attached. If the towel is
attached, the large triangular brush can steam and clean at the same time.
36. Steam Squeegee -
Cleans windows and mirrors.
37. Steam Lance
- The steam lance can be used with parts 20-27. Some of these
attachments are used with great success in hard to reach areas or in areas that
traditional cleaning methods are unable to perform. As with all attachments the heat
of the vapor is what speeds the cleaning process. Therefore, the slower the brush
passes over the surface, the more effective it will be. In case of extreme build up, it
may take longer for the vapor to penetrate the surface. Always point the brush
directly at the surface to be cleaned, then rub the brush over the surface. If you are
unsure whether the surface you will clean is heat resistant, try in a hidden area and
test.
38. Medium Round Nylon Brush
- Cleans surfaces with a wider coverage area than the
small nylon detail brush.
