Daikin VRV Aurora RXLQ-TATJU Series Скачать руководство пользователя страница 207

Страница: 207 / 442

SiUS341802EC

Field Setting from Outdoor Unit

Part 5 Field Settings and Test Operation

200

2.6.3 Setting Procedure of Night-Time Low Noise Operation and Demand

Operation

1. Setting mode 1 (H1P OFF)

In setting mode 2, press the

MODE (BS1)

button once



Setting mode 1 is entered and H1P turns

OFF. While the setting mode 1 is displayed,

In night-time low noise operation

and

In demand

operation

are displayed.

2. Setting mode 2 (H1P ON)

1. In setting 1, press and hold the

MODE (BS1)

button for more than 5 seconds.



Setting mode 2

is entered and H1P lights.

2. Press the

SET (BS2)

button several times and match the LED display with the Setting No. you

want.

3. Press the

RETURN (BS3)

button once, and the present setting content is displayed.



Press

the

SET (BS2)

button several times and match the LED display with the setting content you

want.

4. Press the

RETURN (BS3)

button two times.



Returns to (1).

5. Press the

MODE (BS1)

button once



Returns to the setting mode 1 and H1P turns OFF.

2.7 Energy Saving and Optimum Operation

This

VRV

system is equipped with advanced energy saving functionality. Depending on the priority,

emphasizes can be put on energy saving or comfort level. Several parameters can be selected,

resulting in the optimal balance between energy consumption and comfort for the particular

application.

Several patterns are available and explained below. Modify the parameters to the needs of your

building and to realize the best balance between energy consumption and comfort.

2.7.1 Target Temperature Settings

• Basic

The refrigerant temperature is fixed independent from the situation.

It corresponds to the standard operation which is known and can be expected from/under previous

VRV

systems:



To activate this operation method under cooling operation, change field settings [2-8] to 2 and

[2-81] to 0.



To activate this operation method under heating operation, change field setting [2-9] to 6 and

[2-82] to 0.

• Automatic

The refrigerant temperature is set depending on the outdoor air conditions. As such adjusting the

refrigerant temperature to match the required load (which is also related to the outdoor air

conditions).

E.g., when your system is operating in cooling, you do not need as much cooling under low outdoor

air temperatures (e.g., 77°F (25°C)) as under high outdoor air temperatures (e.g., 95°F (35°C)).

Using this idea, the system automatically starts increasing its refrigerant temperature, automatically

reducing the delivered capacity and increasing the system’s efficiency.



To activate this operation method under cooling operation, change field settings [2-8] to 0

(default).

E.g., when your system is operating in heating, you do not need as much heating under high

outdoor air temperatures (e.g., 59°F (15°C)) as under low outdoor air temperatures (e.g., 23°F

(–5°C)).

Using this idea, the system automatically starts decreasing its refrigerant temperature,

automatically reducing the delivered capacity and increasing the system’s efficiency.

Содержание VRV Aurora RXLQ-TATJU Series



























































































































































































































































































































































































































































Результаты поиска

Содержание VRV Aurora RXLQ-TATJU Series

Отзывы:

Похожие инструкции для VRV Aurora RXLQ-TATJU Series

Бренды по названию

Популярные бренды

Daikin VRV Aurora RXLQ-TATJU Series, Руководство по обслуживанию

Результаты поиска

Содержание VRV Aurora RXLQ-TATJU Series

Отзывы:

Похожие инструкции для VRV Aurora RXLQ-TATJU Series

Бренды по названию

Популярные бренды