Daikin FTKS20DVMW(L), Руководство по обслуживанию

Страница: 109 / 228

Instruction SiENBE04-507A
100 System Configuration
NOTE
Check
„
Before a long idle period
1. Operate the “FAN only” for several hours on a fine day to dry out the inside.
• Press “MODE selector button” and select “FAN” operation.
• Press “ON/OFF” button and start operation.
2. Clean the air filters and set them again.
3. Take out batteries from the remote control.
4. Turn OFF the breaker for the room air conditioner.
• Operation with dirty filters :
(1) cannot deodorize the air.
(2) cannot clean the air.
(3) results in poor heating or cooling. (4) may cause odour.
• To order Titanium Apatite Photocatalytic Air-Purifying Filter contact to the service shop there you
bought the air conditioner.
• Dispose of old filters as burnable waste..
Check that the base, stand and other fittings of the outdoor unit are not decayed or corroded.
Check that nothing blocks the air inlets and the outlets of the indoor unit and the outdoor unit.
Check that the drain comes smoothly out of the drain hose during COOL or DRY operation.
•
If no drain water is seen, water may be leaking from the indoor unit. Stop operation and consult
the service shop if this is the case.
Item Part No.
Titanium Apatite Photocatalytic Air-Purifying Filter. (without
frame) 1 set
KAF970A46