Operation Manual
SiBE06-708_A
65
Operation Manual
2.3
Adjusting the Airflow Direction
12
Adjusting the Airflow Direction
1.
•
2.
•
•
•
•
•
1, 2
COOL/
HEAT
You can adjust the airflow direction to increase
your comfort.
To adjust the horizontal
blade (flap)
Press “SWING button ”.
“ ” is displayed on the LCD and the
flaps will begin to swing.
When the flap has reached
the desired position,
press “SWING button ”
once more.
The flap will stop moving.
“ ” disappears from the LCD.
To adjust the vertical
blades (louvers)
Hold the knob and move the louver.
(You will find a knob on the left-side and the right-
side blades.)
Notes on flap and louvers angle
Unless “SWING” is selected, you should set the
flap at a near-horizontal angle in HEAT mode and
at a upward position in COOL or DRY mode to
obtain the best performance.
ATTENTION
When adjusting the flap by hand, turn off the unit,
and use the remote controller to restart the unit.
Be careful when adjusting the louvers. Inside the
air outlet, a fan is rotating at a high speed.
H
DRY
Содержание Floor Standing Type F-Series
Страница 12: ...SiBE06 708_A 1 List of Functions Part 1 List of Functions 1 Functions 2 1 1 Cooling Only 2 1 2 Heat Pump 5 ...
Страница 19: ...SiBE06 708_A Specifications 8 Part 2 Specifications 1 Specifications 9 1 1 Cooling Only 9 1 2 Heat Pump 14 ...
Страница 146: ...Check SiBE06 708_A 135 Service Diagnosis RK X S25 35G2V1B9 models R12035 Tester 1 2 3 4 ...