Daikin Floor Standing Type F-Series, Руководство по обслуживанию

Страница: 75 / 283

SiBE06-708_A Operation Manual
Operation Manual 64
11
„
5.
•
„
•
•
•
•
„
•
„
•
„
•
•
•
„
•
To change the airflow rate setting
Press “FAN setting button”.
DRY mode
The airflow rate setting is not variable.
AUTO or COOL or HEAT or FAN mode
Five levels of airflow rate setting from “ ” to “ ”
plus “ ” “ ” are available.
Indoor unit quiet operation
Use this when making the noise quieter.
When the airflow is set to “ ”, the noise from the indoor unit will become quieter.
NOTE
Note on HEAT operation
Since this air conditioner heats the room by taking heat from outdoor air to indoors, the heating
capacity becomes smaller in lower outdoor temperatures. If the heating effect is insufficient, it
is recommended to use another heating appliance incombination with the air conditioner.
The heat pump system heats the room by circulating hot air around all parts of the room.
After the start of heating operation, it takes some time before the room gets warmer.
In heating operation, frost may occur on the outdoor unit and lower the heating capacity. In
that case, the system switches into defrosting operation to take away the frost.
During defrosting operation, hot air does not flow out of indoor unit.
Note on COOL operation
This air conditioner cools the room by blowing the hot air in the room outside, so if the
outside temperature is high, the performance of the air conditioner drops.
Note on DRY operation
The computer chip works to rid the room of humidity while maintaining the temperature as
much as possible. It automatically controls temperature and airflow rate, so manual
adjustment of these functions is unavailable.
Note on AUTO operation
In AUTO operation, the system selects a temperature setting and an appropriate operation
mode (COOL or HEAT) based on the room temperature at the start of the operation.
The system automatically reselects setting at a regular interval to bring the room
temperature to user-setting level.
If you do not like AUTO operation, manually change the set temperature.
Note on airflow rate setting
At smaller airflow rates, the cooling (heating) effect is also smaller.