Daikin ERQ Series, Руководство по обслуживанию

Страница: 142 / 153

ESiEN09-06 A Field Setting
Test Operation 133
The numbers in the "No." column represent the number of times to press the
SET (BS2) button.
Setting item 0 Display contents of “Number of units for various settings”
No. Setting item
LED display
Data display
H1P H2P H3P H4P H5P H6P H7P
0 Various settings Lower 4 digits
1 C/H unified address
Lower 6 digits
2 Low noise/demand address
3 Not used
4 Airnet address
5 Number of connected AHUs
6 Number of connected BS units
7
Number of connected zone units
(excluding outdoor and BS unit)
8 Number of outdoor units
9 Number of connected BS units
Lower 4 digits:
upper
10 Number of connected BS units
Lower 4 digits:
lower
11
Number of zone units (excluding
outdoor and BS unit)
Lower 6 digits
12 Number of terminal blocks
Lower 4 digits:
upper
13 Number of terminal blocks
Lower 4 digits:
lower
14
Contents of malfunction (the
latest)
Malfunction
code table
Refer page
189.
15
Contents of malfunction
(1 cycle before)
16
Contents of malfunction
(2 cycle before)
20 Contents of retry (the latest)
21 Contents of retry (1 cycle before)
22 Contents of retry (2 cycle before)
25
Number of multi connection
outdoor units
Lower 6 digits
EMG operation /
backup operation
setting
ON
OFF
Defrost select setting Short
Medium
Long
Te setting H
M
L
Tc setting H
M
L
c. Monitor mode
<Selection of setting item>
<Confirmation on setting contents>
To enter the monitor mode, push the
MODE (BS1) button when in
“Setting mode 1”.
Push the SET (BS2) button and set
the LED display to a setting item.
Push the RETURN (BS3) button to
display different data of set items.
Push the RETURN (BS3) button and
switches to the initial status of
“Monitor mode”.
Push the MODE (BS1) button and
returns to “Setting mode 1”.
(V2765)