Instruction
Si18-525B
300
Operation Manual
This operation manual is for the following systems
with standard control. Before initiating operation,
contact your Daikin dealer for the operation that cor-
responds to your system.
NOTE
• If the unit you purchased is controlled by a wire-
less remote controller, also refer to the wireless
remote controller’s operation manual.
If your installation has a customized control system,
ask your Daikin dealer for the operation that corre-
sponds to your system.
1. WHAT TO DO BEFORE OPERATION
PRECAUTIONS FOR GROUP CONTROL
SYSTEM OR TWO REMOTE CONTROLLER
CONTROL SYSTEM
This system provides two other control systems
beside individual control (one remote controller con-
trols one indoor unit) system. Confirm the following if
your unit is of the following control system type.
• Group control system
One remote controller controls up to 16 indoor units.
All indoor units are equally set.
• Two remote controllers control system
Two remote controllers control one indoor unit (In case
of group control system, one group of indoor units)
The unit is individually operated.
NOTE
• Contact your Daikin dealer in case of changing
the combination or setting of group control and
two remote controllers control system.
Refer to figure 2 on page [1]
We recommend that you read this instruction man-
ual carefully before use to gain full advantage of the
function of the air conditioner, and to avoid malfunc-
tion due to erroneous handling.
This air conditioner comes under the term appliances
not accessible to the general public.
Names and functions of parts
a Indoor unit
b
Outdoor unit
The external appearance of the outdoor unit
varies depending on its capacity class.
The outdoor unit shown in the figure is for
reference to indicate features.
Contact your Daikin Dealer and verify which
outdoor unit you have.
c Remote controller
d Inlet air
e Discharged air
f
Air outlet
g Air flow flap (at air outlet)
h Refrigerant piping, connection electric wire
i
Drain pipe
j
Suction grille
The built-in air filter removes dust and dirt.
k
Ground wire
Wire to ground from the outdoor unit to pre-
vent electrical shocks.
2. SAFETY CONSIDERATIONS
• Heat pump type
This system provides cooling, heating, automatic,
program dry, and fan operation modes.
• Cooling only type
This system provides cooling, program dry, and
fan operation modes.
Содержание D-Series
